If you have a pickup truck with tilt and telescopic tow hitch, then you may find yourself more than a little interested in a tilt tray. These devices are used for pulling vehicles with a special design and usually will be anchored to the back of the truck using various pieces of equipment.
Towing a vehicle this way will make it easier for the driver to lift the truck up onto the tow hitch and for it to have some lower center of gravity. This in turn will help the driver to gain more control when operating the truck, especially if the truck has a stiff ride when it is towed across some ruts or through some potholes on the road.
Tilt and telescopic vehicles will usually come equipped with two attachments, one that will raise the back of the truck and another that will serve as the tilting mechanism. When these two items are mounted together, the driver can use either one to raise and lower the truck. Then, they can keep one attached to the tow hitch.
Tilting the trailer can also help to maintain its level and balance, especially if there is a large amount of weight involved. The tilting action will help with maintaining a straight and level trajectory and reduce the chances of damage to the vehicle or a trailer hitch if the vehicle rolls over.
There are different types of tilting and telescoping towing systems that are available on the market. These systems range from the basic tilt to a full-featured tow/haul system that comes with a hydraulic lift mechanism.
When using a Tilt Tray Hire Perth, you will need to first attach the trailer hitch to the tow. This should then be locked in place by either using a car jack or by anchoring the hitch to a concrete block.
You will then be able to lower the weight to a height where it will be completely level and stable. Thisheight can vary depending on the type of vehicle that you are using, but generally this is between 35 and 55 inches.
Once the weight is at this level, the second piece of equipment that you will need to install is the tilt tray. This is often a piece of metal that has several brackets that will be fixed to the hitch and the tow hitch.
When the tray is attached, the next step is to set it up in the right place so that it will be able to properly support the weight of the tow and the trailer. Usually, this is done by aligning the tray on the hitch on the tow hitch.
Some trays utilize two wheels for both supporting the weight and tilting it. Others are simply designed to tilt in a single direction only. After you have positioned the tray so that it is correctly supported, it is now time to affix the locking device to the hitch and the tray. The locking device will be used for locking the doors in place and also to keep them from accidentally coming open.
Finally, you can safely set the weight on the hitch and the tray and then lift the truck up on the hitch and up onto the trailer. This method will keep the weight on the tray evenly balanced and allow the tilting and telescoping feature to function properly.